B2300 Regular Cab 2WD L4-2.3L VIN A (1997)
Brake Pad: Service and Repair
1. Remove in the order shown in the figure, noting the following:
^
Use a C-clamp to compress the caliper piston into the bore.
NOTE: Place the head of the C-clamp against the caliper, and the screw end of the C-clamp against the outer disc pad.
2. Inspect all parts and repair or replace as necessary.
3. Install in reverse order of removal.
4. After installation, depress the pedal a few times, then verify that the brakes do not drag while rotating the wheels by hand.
