B2300 Regular Cab 2WD L4-2.3L VIN A (1997)
Compressor Clutch: Service and Repair
Removal
NOTE
-
Before disassembling the A/C compressor clutch assembly for repair, it is important to check the A/C clutch air gap. This will help determine
if the clutch is not engaging or if the compressor is failing internally.
1. Remove the clutch hub retaining bolt. Use universal spanner wrench.
NOTE
-
Note the location of coil electrical connection for proper orientation during clutch coil installation.
2. Remove clutch hub and shims from compressor shaft.
NOTE
-
If hub cannot be pulled from compressor shaft, screw an 8mm bolt into shaft hole of clutch hub to force hub from shaft.
3. Remove the pulley retaining snap ring and remove pulley.
4. Install shaft protector tool 49 UN01 047 on the nose opening of the compressor.
