B2300 Regular Cab 2WD L4-2.3L VIN A (1997)
Horn Switch: Service and Repair
1. Remove air bag module.
2. Remove in the order shown in the figure.
3. Inspect the parts and repair or replace as necessary.
4. Install in reverse order of removal.
5. Tighten retaining bolts to 6.5-7.5 N.m (0.65-0.75 kgf.m, 58-66 lb-in).
NOTE
^
Make sure vehicle wheels and steering wheel are in straight-ahead position.
^
Disconnect battery-to-starter relay cable and wait for at least one minute for air bag backup power supply to deplete
