B2300 Regular Cab 2WD L4-2.3L VIN A (1997)
Alignment: Service and Repair
Toe Adjustment
Total Toe-In
1. Loosen the clamp bolts at each end of the spindle connecting rod tube.
2. Rotate the sleeve until the correct toe adjustment is obtained.
3. With the clamps centered between the protrusions on the adjustment sleeve lock ring, position the bolts horizontally with the clamp nuts facing in the
direction shown. Tighten the clamp nuts to 40 - 57 Nm (30 - 42 ft. lbs.).
4. Recheck the toe adjustment after tightening the clamps.
5. Check that the steering wheel is centered.