B2300 Regular Cab 2WD L4-2.3L VIN A (1997)
8. One person should depress the brake pedal a few times, and then hold it in the depressed position.
9. A second person should loosen the bleeder screw, drain out the fluid and retighten the screw.
10. Repeats steps 8 and 9 until no air bubbles are seen. Move on the left rear, right front, and to the left front.
11. Check for correct brake operation.
12. Verify that there is no fluid leakage. Clean any spilled fluid with rags.
13. After bleeding the air, add brake fluid to the reservoir up to the specified level.
NOTE: Air bleeding must be done from the bleeder screw farthest from the disassembled parts to the nearest.
