B2300 Regular Cab 2WD L4-2.3L VIN A (1997)
Valve Body: Procedures
On-Vehicle
CAUTION: Clean the transmission exterior thoroughly with a steam cleaner or cleaning solvents before removal.
REMOVAL
1. Disconnect the negative battery cable.
2. Drain the ATF into a suitable container.
3. Remove the oil pan and gasket. Discard the gasket.
4. Remove the oil strainer and O-rings. Discard the O-rings.
5. Carefully lift up on the wire loom guide and protector. Disengage the retaining pins from the solenoid brackets.
6. Disconnect the six solenoid connectors from the solenoids by carefully pulling upward and moving side to side.
