B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
Brake Bleeding: Service and Repair
Master Cylinder Bleeding
CAUTION:
^
Do not allow the reservoir to run dry during air bleeding.
^
Do not spill brake fluid onto painted surfaces. If spilled, wipe it off immediately.
1. Remove the brake fluid from the reservoir by using a suction pump.
2. Fill the reservoir with clean brake fluid.
3. Attach a vinyl tube to the farthest bleeder fitting and place the other end of the tube in a clear container.
4. Pump out the old brake fluid by loosening the bleeder fitting and pumping the brake pedal until only clean fluid is expelled.
5. Perform the above for all bleeder fittings.
6. Fill the reservoir to the specified levels.
