B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
Cruise Control Switch: Testing and Inspection
Cruise Control Servo Switch Assembly
To test cruise control servo switch, perform the following voltage and resistance measurements.
^
Voltage Measurements: Remove harness connector from cruise control servo. Connect the negative lead of voltmeter to Pin 10 (P/O) of connector.
Measure the DC or AC voltage of the following circuits with positive lead of meter.
VOLTAGE MEASUREMENT - DC
VOLTAGE MEASUREMENT - AC
^
Resistance Measurements: Remove harness connector at cruise control servo. Connect an ohmmeter between the designated circuits with the
ignition switch off.
RESISTANCE MEASUREMENTS
