B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
Intake Manifold: Service and Repair
REMOVAL/INSTALLATION
1. Disconnect the electrical connector from the following parts:
-
Mass air flow sensor
-
Intake air temperature sensor
-
Throttle position sensor
-
Idle air control solenoid
2. Disconnect accelerator cable.
3. Remove in the order shown in the figure.
4. Inspect all parts and repair or replace as necessary.
5. Install in the reverse order of removal.
1. Air cleaner
2. Air intake hose
3. Throttle body
4. Upper intake manifold
5. Fuel rail
6. Fuel injector
7. Intake manifold
Fuel Rail Removal Note