B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
NOTE
-
Do not use air tools.
11. Check clutch air gap between clutch disc and pulley mating surfaces with a feeler gauge. The air gap should be between 0.35 and 0.85 mm (0.014
and 0.033 inch). Check at three locations spaced around the pulley.
12. If clutch air gap is not within specification, repeat steps 4 through 6 with various thickness shims until air gap is within specification.
13. Leak test, evacuate and charge the system.
14. Cycle clutch ten times at idle to burnish the clutch and prevent slippage.
