B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
Camshaft Position Sensor: Description and Operation
CAMSHAFT POSITION SENSOR (CMP)
Detects position of camshaft and sends signal to PCM.
Operation
PCM uses for synchronizing firing of sequential fuel injectors.
NOTE:
-
Uses a Variable Reluctance type sensor. CMP identifies when #1 piston is at top dead center of its compression stroke.
-
If the camshaft position sensor or circuit has an open or short, Diagnostic Trouble Code No. P0340 is output.
-
If the camshaft position sensor circuit fails, the engine may stall and not restart.
