B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
Transmission Speed Sensor: Service and Repair
Overdrive Drum Speed (ODS) Sensor
Replacement
1. Disconnect vehicle harness connector.
2. Remove attaching bolt with T30 Torx socket.
3. Remove ODS sensor from case.
4. Inspect 0-ring for damage.
5. Lubricate sensor 0-ring with petroleum jelly.
6. Install ODS sensor into case and tighten attaching bolt.
Tightening torques: 8-11 Nm (61-87 in.lbs.)
7. Reconnect vehicle harness.
