B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
2. Install Mandrel Tool T75L-3517-A1, or equivalent over the sleeve. Slide one valve sleeve ring over the mandrel tool.
3. Slide Pusher Tool T75L-3517-A2, or equivalent over the mandrel tool. Push down on the pusher tool, forcing the seal down the ramp into the
fourth groove of the valve sleeve.
4. Repeat this step three times and add Spacer Tool T75L3517-A3, or equivalent each time under the pusher tool.
5. Apply ATF Type-F (M2C33-F) or Dexron II to the valve sleeve and rings.
