B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
l.
Ensure the dark color plastic converter relief valve and spring is in their proper location.
m.
Ensure the extension housing lube orifice is in its proper location.
NOTE:
Apply petroleum jelly on the valve body separator plate to hold it in place on the main control.
NOTE:
Use new bonded separator plate to main control.
n.
Install the main control valve body separator plate with hole # )50 deleted, to the main control. Refer to parts information below to select
correct separator plate for your application.
o.
Install SST Alignment Pins (307-333 and 307-334) into the main control valve body.
NOTE:
It is important to properly align components using SST Alignment Pins (307-333 and 307-334 or equivalent).