B2300 SE Regular Cab 2WD L4-2.3L VIN A (1997)
Axle Shaft: Service and Repair
REMOVAL
1. Jack up the rear of the vehicle and support it with safety stands.
2. Remove the wheel and tire assemblies.
3. Drain the differential oil into a suitable container.
4. Remove in the order shown in the illustration, referring to the following notes:
Differential Cover (2)
NOTE: Plastic differential covers must be replaced once removed from the axle casing.
Pinion Shaft (4)
1. On differentials equipped with a 3.08:1, 3.27:1 or 3.45:1 ratio axle, remove the pinion shaft.
