B2300 SE Regular Cab 2WD L4-2.3L VIN D (2001)
Oil Pan: Service and Repair
Oil Pan
Removal
1. Remove the engine from the vehicle.
2. Remove the engine oil level indicator assembly.
1. Remove the engine oil level indicator.
2. Remove the bolts.
3. Remove the engine oil pan bolts and oil pan.
3. Remove the oil pan bolts and oil pan.
Installation
1. Clean and inspect all mating surfaces.
2. NOTE: The oil pan must be installed and the bolts tightened with four minutes of applying the silicone gasket and sealant.