B2300 SE Regular Cab 2WD L4-2.3L VIN D (2001)
Install the fan drive pulley using a nut and bolt with flat washers.
2. Clean and inspect the mounting surfaces of the engine and the front cover.
3. NOTE: The engine front cover must be installed and the bolts tightened within four minutes of applying the silicone gasket and sealant.
Apply a 2.5 mm bead of silicone gasket and sealant to the cylinder head and oil pan joint areas. Apply a 2.5 mm bead of silicone gasket and
sealant to the front cover.
