mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Evaporative Check Valve > < Canister Purge Control Valve|Description and Operation|Page 1958

B2300 SE Regular Cab 2WD L4-2.3L VIN D (2001)

Page 1
background image

Evaporative Canister Filter: Service and Repair

DUST SEPARATOR REMOVAL/INSTALLATION

1. Remove the evaporative emission canister. Refer to EVAPORATIVE EMISSIONS CANISTER REMOVAL/INSTALLATION. 

2. Disconnect the canister vent solenoid hose assembly. 

3. Remove the EVAP dust separator. 
4. Install in reverse order of removal. 
5. Perform Leak Test. See EVAPORATIVE EMISSION SYSTEM LEAK TEST. 
6. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle Test. See DRIVE CYCLES.

Evaporative Check Valve > < Canister Purge Control Valve|Description and Operation|Page 1958