B2300 SE Regular Cab 2WD L4-2.3L VIN D (2001)
Combination Switch: Service and Repair
1. Disconnect the negative battery cable.
2. Remove the ignition lock cylinder.
3. If equipped, remove the tilt wheel handle.
4. Remove the upper and lower steering column shrouds.
5. Remove in order shown in figure.
1. Screws
2. Connectors
3. Switch
6. Install in reverse order of removal.
Tightening torque: 2 - 3 N.m { 20 - 31 kgf.cm, 18 - 26 in.lbf }