B2500 SE Regular Cab 2WD L4-2.5L VIN C (1998)
4.
Remove the front upper compressor bolt.
5.
Install bracket around A/C hose where insulation has been removed.
6.
Pinch the A/C hose bracket so that the bolt holes are aligned and lay flat against the A/C compressor.
7.
Re-install the A./C compressor bolt through the bracket and into its original position. Torque to specification.
Tightening torque 17-20 ft-lb
8.
Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
Note
^
This information applies to verified customer complaints on vehicles covered under normal warranty.
Warranty Type
A
Symptom Code
82
Damage Code
9G
Part Number Main Cause
See PART(S) INFORMATION
Quantity
1
Operation Number / Labor Hours
YY175XRX / 0.3