B2500 SE Regular Cab 2WD L4-2.5L VIN C (1998)
Parking Lamp: Service and Repair
1. Pull out the parking lamp assembly.
1. Remove the screws.
2. Pull out the parking lamp assembly.
2. Remove the parking lamp assembly.
1. Disconnect the three connectors.
2. Remove the parking lamp assembly.
3. Install in reverse order of removal.
Tightening torque: 1.7 - 2.1 N.m (17.3 - 21 kgf.cm, 15 - 18 in.lbf)