B2500 SE Regular Cab 2WD L4-2.5L VIN C (1998)
(1) Position the front wheel spindle to the lower ball joint.
(2) Install the castellated nut.
(3) Install a new cotter pin.
3. Install the front stabilizer bar link nut.
4. Remove the coil spring compressor tool or equivalent.
5. Install the front shock absorber and the two lower nuts.
6. Install the upper shock absorber bushing and nut/washer assembly.
7. Install the front disc brake rotor shield, refer to Brakes and Traction Control.
8. Install the tire and wheel assembly.
