B3000 V6-3.0L (2007)
Initial Inspection
BODY SYSTEM DIAGNOSIS AND TESTING
Inspection and Verification
Leaks
NOTE: Trim reveals the location of most leaks
1. Remove any trim or carpet in the general area of the leak.
2. Road test or water test the vehicle.
3. Inspect for a dust pattern around the area in question.
4. Inspect for water paths near and above the area in question.
5. Some leaks can be located by placing bright light under the vehicle, removing any necessary trim or carpet, and inspecting the interior of the body
at joints and weld lines.