B3000 V6-3.0L (2007)
Note:
^
To prevent incorrect installation, the socket end of each brake adjuster screw is stamped R or L.
7. Assemble the brake adjuster screw assembly.
^
Apply silicone brake caliper grease to the threads on the brake adjuster screw.
^
Install the brake adjuster screw into the brake shoe adjusting screw nut to the end of the threads, and then loosen one-half turn.
^
Install the brake shoe adjusting screw socket on the brake shoe adjusting screw nut.
8. Install the brake adjuster screw assembly.
^
Position the brake adjuster screw assembly.
^
Install the brake shoe adjusting screw spring.
^
Position the brake shoe adjusting lever cable.
^
Position the adjusting lever return spring and the brake shoe adjusting lever.
^
Hook the brake shoe adjusting lever cable to the brake shoe adjusting lever.
9. Test the operation of the automatic self-adjuster.
^
Pull the brake shoe adjusting lever cable and check that the brake shoe adjusting lever rotates the brake shoe adjuster assembly
^
Release the brake shoe adjusting lever cable and check that the brake shoe adjusting lever advances to the next notch on the brake shoe
adjusting screw nut.
10. Adjust the brakes.
11. Install the brake drum.
