B3000 V6-3.0L (2007)
Radiator Cap: Testing and Inspection
RADIATOR CAP INSPECTION
1. Inspect the coolant recovery reservoir cap and seals for damage or deterioration. Replace the radiator cap if necessary.
2. Attach the radiator cap to a radiator cap tester (commercially available).
Note:
^
If the plunger of the pressure tester is depressed too fast, an incorrect pressure reading will result.
3. Slowly pump the pressure tester until the pressure gauge stops increasing and note the highest pressure reading. Release pressure and repeat the
test. Replace the radiator cap if the pressure is not 99.3 - 121.4 kPa (14.4 - 17.6 psi).