B3000 V6-3.0L (2007)
14. Remove and discard the intake manifold gaskets and end seals.
Installation
NOTE: Clean and inspect all mating surfaces.
NOTE: If the lower intake manifold is not installed within four minutes, remove the sealant and reapply.
1. Install the intake manifold gaskets and seals.
1. Apply a drop of silicone gasket and sealant at the four cylinder block-to-cylinder head seams
2. Position the intake manifold gaskets.
3. Position the intake manifold front and rear seals.
2. Position the lower intake manifold.