B3000 V6-3.0L (2007)
Front Crankshaft Seal: Service and Repair
CRANKSHAFT FRONT OIL SEAL REPLACEMENT - 3.0L
1. Disconnect the negative battery cable.
2. Remove the air cleaner outlet tube.
3. Remove the cooling fan blade and fan shroud.
4. Remove the drive belt.
5. Remove the crankshaft pulley
6. Remove the vibration damper bolt and the washer.
7. Remove the crankshaft damper, using Crankshaft Damper Remover ST 303-009 (T58P-6316-D) or equivalent.
8. Remove the crankshaft key, if required.
9. Remove the crankshaft front oil seal.
10. Install in the reverse order of removal by taking care of the following note.
Front Oil Seal Installation
1. Install the crankshaft front oil seal.
1
Lubricate the seal lip with clean engine oil.
2
Using Vibration Damper and Seal Replacer ST 303-175 (T82L-6316-A) or equivalent and a front cover seal replacer, install the front oil seal.
Crankshaft Pulley Installation