B3000 V6-3.0L (2007)
7. Engage Shaft Seal Remover ST 49 UN01 044 into the inside diameter of the shaft seal.
8. Turn the ST handle clockwise to expand the tool tip inside of the shaft seal.
9. Pull the seal from the A/C compressor.
Installation Note
CAUTION: To prevent refrigerant system contamination, do not allow dirt or other foreign materials to enter the A/C compressor.
1. Clean the compressor nose area.
2. Place the shaft seal on the Shaft Seal Protector ST 49 UN01 045. Lubricate the shaft seal and the special tool with refrigerant oil.
