B3000 V6-3.0L (2007)
2. Release the clamps and disconnect the heater hoses.
8. Detach the pin-type retainer and position aside the windshield washer hose
9. Disconnect the vacuum supply hose near the evaporator core housing
10. Disconnect the condenser to evaporator line spring lock coupling from the evaporator core inlet. See A/C SPRING LOCK COUPLING.
-
Discard the O-ring seals.
NOTE: The following step is performed at the lower passenger side dash panel, inside the passenger compartment.
11. Disconnect the vacuum hose connector and remove the nut.
