B3000 V6-3.0L (2007)
-
Disassembling the air bag system components could cause it to not operate (deploy) normally. Never disassemble any air bag system components.
Air Bag Module, Pre-tensioner Front Buckle Handling
-
Oil, grease or water on the air bag modules may cause the air bags and pre-tensioner front buckles to fail to operate (deploy) in an accident Never
allow oil, grease or water to get on the air bag modules or pre-tensioner front buckles.
-
Inserting a screwdriver or similar object into the connector of an air bag module or a pre-tensioner front buckle may damage the connector and
cause the air bag module or the pre-tensioner front buckle to operate (deploy) improperly, which may cause serious injury. Never insert any
foreign objects into the air bag module or seat belt connectors.
Air Bag Module, Pre-tensioner Front Buckle Reuse
-
Even it an air bag module or pre-tensioner front buckles does not operate (deploy) in a collision and does not have an external signs of damage, it
may have been damaged untimely, which may cause improper operation. Before reusing a live (undeployed) air bag module and the pre-tensioner
front buckles, always use the on-board diagnostic to diagnose the air bag module and the pre-tensioner front buckles to verify that they have no
malfunction.
Air Bag Wiring Harness Repair
-
Incorrectly repairing an air bag wiring harness can accidentally operate (deploy) the air bag module and pre-tensioner front buckles. If a problem
is found in the air bag wiring harness, always replace the wiring harness with a new one.