B3000 V6-3.0L (2007)
^
Lubricate O-rings with Mazda ATF TYPE 5 or they may be damaged.
8. Lube and install new O-rings onto the oil strainer. Install a new oil strainer.
^
Position oil strainer on the control valve body
Caution:
^
Make sure wire harness is not pinched under filter.
9. Install bolt.
10. Position the oil pan magnet in the transmission oil pan.
11. Position a new gasket (2) on the oil pan (1).
12. Install and align the oil pan.
^
Loosely install the 18 transmission oil pan bolts.
13. Tighten the oil pan bolts.
^
Use a crisscross sequence to tighten the oil pan bolts.