B3000 V6-3.0L (2007)
Camshaft Position Sensor: Service and Repair
Camshaft Synchronizer
CAMSHAFT SYNCHRONIZER REMOVAL / INSTALLATION - 3.0L
Removal
1. Disconnect the battery ground cable. See BATTERY DISCONNECT.
CAUTION:
-
The No. 1 cylinder must be set on top dead center (TDC) of the compression stroke or the synchronizer assembly will not be installed
correctly.
-
Do not turn the crankshaft or the camshaft during the removal and installation procedure or the fuel system timing will be out of time
with the engine and possibly cause engine damage.
