B3000 V6-3.0L (2007)
in the RUN position.
Possible Causes
-
Fuse
-
Circuit open
-
Ignition switch
-
SJB
CAUTION: Use the Flex Probe Kit for all test connections to prevent damage to the wiring terminals. Do not use standard multimeter probes.
Pinpoint Test 4
PINPOINT TEST 4: NO POWER IN START
Step 1-Step 3
Normal Operation
The ignition switch START circuit provides fused battery voltage along circuits (L/W) and (W/O) to the smart junction box (SJB) when the key is in the
START position.
Possible Causes
-
Fuse
-
Circuit open
-
Circuit shorted
-
Ignition switch
-
SJB
CAUTION: Use the Flex Probe Kit for all test connections to prevent damage to the wiring terminals. Do not use standard multimeter probes.
Pinpoint Test 5
PINPOINT TEST 5: THE IGNITION KEY IS HARD TO TURN