B3000 V6-3.0L (2007)
Caution:
^
Excessive pressure may break the retaining pins.
4. Install the main control valve body wire loom.
^
Align the retaining pins to the holes in the solenoid clamps and gently press in the main control valve body wire loom guide and protector.
5. Install the oil strainer.
(1) Install the oil strainer.
(2) Install the bolt.
6. Position a new gasket on the oil pan.
7. Align and install the oil pan.
(1) Loosely install the 18 oil pan bolts.
Note:
^
Use a crisscross sequence to tighten the transmission oil pan bolts.
8. Tighten the bolts.
9. Lower the vehicle.
Note:
