B3000 V6-3.0L (2007)
10. Remove the three bolts and the wheel hub.
11. Remove the tie-rod end castellated nut.
1. Remove the cotter pin.
2. Remove the castellated nut.
Caution:
^
Do not use a hammer to separate the tie rod from the wheel knuckle or damage to the wheel knuckle will result.
Caution:
^
Do not damage the tie-rod boot when installing the special tool.
12. Using the special tool, separate the tie-rod end from the front wheel knuckle.
13. Using a suitable jack, support the front suspension lower arm.
