B3000 V6-3.0L (2007)
^
Tap the manual control lever shaft spring pin into the transmission case.
4. Align flats of the manual valve inner lever with flats on the manual control lever shaft. Install the manual valve inner lever and parking lever
actuating rod onto the manual control lever shaft.
Caution:
^
Do not bend the manual valve inner lever pin.
5. Install the manual valve inner lever nut.
Caution:
^
Park pawl actuating rod must be properly installed into parking pawl and guide cup located in extension housing. Verify park linkage
function.
6. Verify that the output shaft is locked in the PARK position.
7. Install the transmission fluid pan with new pan gasket.
8. Install the digital TR sensor.
Note:
^
When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive
strategy. The customer needs to be notified that they may experience slightly different upshifts either soft or firm and this is a temporary
condition and will eventually return to normal operating condition.
9. Connect the negative battery cable.
10. Fill the transmission to the proper fluid level.
