B3000 V6-3.0L (2007)
Note:
^
Make sure main control to case gasket is properly aligned.
Use petroleum jelly to hold gasket in place.
16. Install the control valve body assembly.
(1) Position the assembly using the alignment pins SST as a guide.
(2) Loosely install the four M6 x 45 mm main control valve body bolts.
Note:
^
The main control valve body bolts will be tightened in later steps.
(3) Loosely install the two M6 x 35 mm main control valve body bolts.
(4) Remove the alignment pins SST.
