B3000 V6-3.0L (2007)
21. Connect the six solenoid connectors to the solenoids.
(1) SS1, SS2, SS3 and CCS/SS4 solenoids
(2) TCC solenoid
(3) EPC solenoid
Note:
^
The wiring guide snaps into place on the solenoid retainers.
22. Install the wiring loom protector and guide.
Caution:
^
Excessive pressure may break the locating pins.
^
Align the pins in the holes of the solenoid brackets and gently push down.
23. Test the solenoid valves.
24. Install new O-rings on the oil strainer.
25. Apply petroleum jelly to the O-rings.
26. Install the oil strainer.
