B3000 V6-3.0L (2007)
12. Loosely install the 18 oil pan bolts.
Note:
^
Use a crisscross sequence to tighten the transmission oil pan bolts.
13. Tighten the oil pan bolts.
14. Connect the vehicle harness to the 16 pin transmission case electrical connector. Make sure the lock is fully engaged.
15. Lower the vehicle.
Note:
^
When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive
strategy. The customer needs to be notified that they may experience slightly different upshifts either soft or firm and this is a temporary
condition and will eventually return to normal operating condition.
16. Connect the negative battery cable.
17. Fill the transmission to the proper fluid level and check for proper transmission operation.