B3000 V6-3.0L (2007)
Clutch Master Cylinder: Service and Repair
CLUTCH MASTER CYLINDER REMOVAL / INSTALLATION
Note:
^
When replacing clutch master cylinder, remove tubing from vehicle for bench bleeding procedure.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the clutch hydraulic line from the transmission using the SST.
3. Lower the vehicle.
4. Remove the two screws and the lower steering column finish panel.
5. Remove the five bolts and the lower reinforcement panel.
6. Disconnect the clutch pedal position (CPP) switch electrical connector.