B3000 V6-3.0L (2007)
Drive/Propeller Shaft: Component Tests and General Diagnostics
Propeller Shaft Indexing
PROPELLER SHAFT INDEXING
Note:
^
If propeller shaft components are replaced and propeller shaft vibration is encountered after installation, index the propeller shaft.
If indexing the propeller shaft does not eliminate the vibration, balance the propeller shaft.
1. Raise and support the vehicle.
2. Disconnect the rear propeller shaft.
3. Rotate the rear companion flange.
4. Connect the propeller shaft.
5. Lower the vehicle and test drive.
6. Repeat procedure if necessary.
Propeller Shaft Inspection
PROPELLER SHAFT INSPECTION
Note:
^
Whenever the vehicle is raised on a hoist, inspect the universal joint slip yoke boot for rips or holes. Replace if required.