B3000 V6-3.0L (2007)
Note:
^
If a new pinion shaft lock bolt is unavailable, coat the threads with a Loctite sealer prior to installation.
5. Install the differential pinion shaft.
1
Align the hole in the differential pinion shaft with the case lock bolt hole.
2
Install a new differential pinion shaft lock bolt.
6. Install the rear brake drums.
7. Apply a new continuous bead of sealant of the specified thickness to the differential housing cover.
Note:
^
The differential housing cover must be installed within 15 minutes of application of the silicone, or new sealant must be applied. If possible,
allow one hour before filling with lubricant to make sure the silicone has correctly cured.
8. Install the differential housing cover. (1). Install the differential housing cover. (2). Install the 10 differential housing cover bolts.
9. Fill the rear axle housing with 2.4 liters (5 pints) of rear axle lubricant.
10. Install the tire and wheel assembly.
11. Lower the vehicle.
