B3000 V6-3.0L OHV (2006)
Rear Bumper Bracket: Service and Repair
BUMPER BRACKET - REAR
Removal and Installation
1. Remove the rear bumper beam.
2. Remove the bolt and nut from the outer bumper bracket-to-inner bumper bracket.
-
To install, tighten to 115 N-m (11.7 kgf-m, 85 ft-lbf).
3. Remove the 2 bolts from the inner bumper bracket- to-frame and remove the inner bumper bracket.
-
To install, tighten to 115 N-m (11.7 kgf-m, 85 ft-lbf).
4. To install, reverse the removal procedure.