B3000 V6-3.0L OHV (2006)
Radiator: Testing and Inspection
Radiator Pressure Test
RADIATOR PRESSURE TEST INSPECTION
1. Remove the radiator cap. Fill the radiator as needed. Connect a radiator tester (commercially available) to the radiator filler neck.
Caution:
^
Do not pressurize the cooling system beyond 138 kPa (20.0 psi).
2. Pump the cooling system to a maximum of 138 kPa (20.0 psi) and hold for 2 minutes. If the pressure drops within this time, inspect for leaks
and repair as required.