B3000 2WD V6-3.0L OHV (1994)
Brake Master Cylinder: Service and Repair
1. Disconnect brake fluid level sensor.
2. Using Line Wrench tool No. 490259770 A/B, or equivalent, disconnect and cap brake fluid lines from master cylinder.
3. Remove proportioning bypass valve attaching bolts and valve, if equipped.
4. Remove bracket, if equipped, then the master cylinder assembly from the power brake booster.
5. Reverse procedure to install, noting the following:
a. Torque master cylinder nuts to 16 - 24 ft.lb.
b. Bleed brake system as previously described.
