B3000 2WD V6-3.0L OHV (1994)
Spark Plug: Service and Repair
SPARK PLUG
Removal
-
Remove the High-Tension Leads.
View: Removing Leads From Spark Plugs
CAUTION: When the High-Tension Lead is to be pulled off, be sure to pull on the boot itself, not the lead.
-
Remove and install the spark plug with a plug socket.
Install Spark Plug Socket Squarely Over Spark Plugs
CAUTION: Be sure the socket fits squarely over the spark plug.
Installation
-
Apply anti-seize compound or molybdenum-based lubricant to the spark plug threads.
-
Tighten the spark plug to the specified torque.
Tightening torque: 9-20 Nm (7-14 ft.lb.)
-
Re-install High-Tension Leads on to the spark plugs.
NOTE: Coat the entire interior surface of the High-Tension Lead boot with a silicone dielectric compound or equivalent.