B3000 2WD V6-3.0L OHV (1994)
Fuel Pressure Release: Service and Repair
CAUTION: Fuel in the fuel system remains under high pressure when the engine is not running.
NOTE: Before disconnecting any fuel line, release the fuel pressure from the fuel system to reduce the possibility of injury or fire.
SST Fuel Gauge With Pressure Release Hose
-
Connect the special service tool (SST) to the fuel pressure relief valve (Schrader (r) valve) located on the fuel distribution pipe (fuel rail).
-
Place the drain hose in a suitable container.
-
Depress the pressure relief button until the pressure is released.
Alternate method
-
Disconnect the inertia fuel shutoff switch.
-
Crank the engine for 15 to 20 sec. to relieve pressure.
NOTE:
-
Use a rag for protection from fuel spray when disconnecting the hoses.
-
When inspecting the fuel system, use the proper special service tools.