B3000 2WD V6-3.0L OHV (1994)
Air Flow Meter/Sensor: Testing and Inspection
Component
Mass Air Flow Sensor
INSPECTION
CAUTION:
- Do not drop or subject the sensor to sharp shock.
- Do not put or allow anything in the sensor.
1. Disconnect the Mass Air Flow Sensor connector.
2. Remove the Mass Air Flow Sensor.
Cut away view of Mass Air Flow Sensor
3. Check for damage of the sensor.
4. Reconnect the Mass Air Flow Sensor.
5. Disconnect the Powertrain Control Module (PCM) connector.
Special Service Tool-SST (Breakout Box)
6. Connect the Special Service Tool (SST) "Break Out Box" to the PCM.