mazda Workshop Repair Guides

Mazda B3000 2WD V6-30L OHV Workshop Service and Repair Manuals

ABOUT US
Component (A/T Only)|Page 2518 > < Transmission Position Switch/Sensor, A/T|Specifications|Page 2515

Transmission Position Switch/Sensor Testing - Component Inspection (A/T Only)

Page 1
background image

Transmission Position Switch/Sensor: Testing and Inspection
Component (A/T Only)

Test Specifications and Ohm Meter Connections

INSPECTION: PARK/NEUTRAL POSITION SWITCH

1. Disconnect the Park/neutral Position Switch connector.
2. Connect an ohmmeter to the switch, as shown.
3. Check the continuity of the switch between the terminals, as shown.
4. If not as specified, replace the Park/neutral Position Switch.

Component (A/T Only)|Page 2518 > < Transmission Position Switch/Sensor, A/T|Specifications|Page 2515