mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Wheel Bearing > < Suspension - Vibration, Shudder During Acceleration
Page 1
background image

Suspension Spring ( Coil / Leaf ): All Technical Service Bulletins
Suspension - Vibration, Shudder During Acceleration

Bulletin No.: 001/94
Issued: 4/27/94 
Revised:

Category
R

Applicable Model/s 
1994 B-Series

Subject:
VIBRATION / SHUDDER DURING ACCEL. FROM START-UP (4X2 CAB PLUS)

APPLICABLE MODELS/VINS 
1994 B-Series

DESCRIPTION 
Vibration or shudder may be felt on acceleration from a stop. This may be caused by improper driveline angles which become excessive during
acceleration. To correct this problem, stiffer rear springs are available to maintain proper driveline angles.

REPAIR PROCEDURE
1.

Replace the rear springs according to the instructions in the workshop manual.

2.

Adjust head light aim on vehicle.

PARTS INFORMATION

Part Number

Description

ZZM5 28 010

Spring Assembly (Rear)

WARRANTY INFORMATION 
(Applies To Vehicles Covered Under Normal Warranty)

Warranty Type:

A

Customer comment Code:

83

Damage Code:

9E

Part Number Main Cause:

ZZM5 28 010

Quantity:

1

Operation Number:

R0701BRX

Labor Hours:

2.2Hrs.

Wheel Bearing > < Suspension - Vibration, Shudder During Acceleration